Opel+ Fiat IMMO Tool Immobilizer V3.50 Car Key Programmer for Reading Pin Code

Software language: English.

1.Opel cars with Immo1,2 and Immo3 (CAN bus) supported up to year2009 ,via OBD2.

2.Programming of new keys for FIAT cars by OBD2: Palio, Siena, Strand, Uno with immobilizer inside the dashboard on CAN bus from year 2008+! Pin code and pre-programmed with TM Pro2 module #100 transponders are required!

Pin code reading from engine ecru of some Opel cars with Immo2. Program/erase keys of immo1,2 and 3.Pin code is required! Clear engine ecru, adaptation of virgin ecru to Immo2. Clear immo2, immo3, adaptation of virgin Immo2 to engine ecru.

List of supported cars:

PIN code read from Opel cars with Delco Multec engine ecru

HSFI 2.0-2.5 - Model - Year - Engine

Ventral B 2000-2001 Y16XE, Z16XE

Astra G 2001-2005 Z14XE, Z16XE, Z16SE

Corse C 2001-2004 Z14XE

Merida 2003-2004 Z16SE

Astra, Corsa with Delco 1.7 DTI diesel 1999-2004

Delco "F" Old Multec Model Year Engine

Astra, Vectra B 1998-2000 X16SZR

How to read pin code from engine ECU

This procedure works with Opel Immo2 cars ONLY!

Switch ignition ON, Start software, and select engine ecu type from menu.

Press "Connect Selected ECU" button, after 5 seconds the data of the ECU will be shown on screen.

Press "Read PIN", software will read data from the engine ecu and after few seconds two pin codes will be displayed on screen. One for petrol engine and one for diesel engine. Choose the correct pin code depending on engine type - diesel or petrol. If you have selected wrong ecu, "message lost error “will be issued, and the connection with ecu will be terminated. You can select other ecu, and can try again.

Warning: Selecting "Delco All Types" will read pin code but also will set trouble code 0602 in engine ecu, which can't be erased!!! Use this option only if you don't care about this trouble code!

the correct pin code. The commands "Clear engine ecu" and "Clear immobiliser2" requires additional wait time, from 10 minutes to several hours in the worst case. The car have to be left with ignition switched ON during this wait time! During this wait time, you can turn off your laptop.

Shenzhen MS Auto Technology Limited is a professional manufacturer of auto diagnostic tools, specialized in researching & developing diagnostic devices for BMW, Mercedes Benz, Ford, GM, Toyota, Honda, Renault etc. Meanwhile, we are an authorized agency for some famous companies, like Launch X431 ,Autel and  Autoboss.

As one of the top manufacturers in China, with our dedicated engineers, we are able to provide customers with high-tech products, technical support and after-sales service. Our products are sold to all over the world, including factories, distributors, agents, garages, shops and individuals. We still provide OEM and ODM service for our customers.

We have over seven years of experience in manufacturing and exporting these products from China to various overseas markets and we also cooperate with satisfied buyers in the US, Europe, South Africa, Southeast Asia and the Middle East. Relying on advanced instruments, perfect quality control system, highly experienced management staff and senior engineering personnel, we are able to satisfy customers' changing demands effectively.

Our company persists in the good service. "Quality, professionalism and innovation" is the belief of our enterprise. By listening to our customers' suggestions and needs, our marketing personnel are able to fulfill all requirements that they receive.

Providing best products and best service is our company target. Contact us today by email or phone and start with a small order, you will find we are your most valuable cooperator.